Allow unassisted users to use "Automatically spot new S&P QSO's". The unassisted user is warned that they must disable spots from being sent from the DX cluster. (Coded by N2IC)

{SpotMe} now supports SO2R and SO2V. (Coded by N2IC)

Radio Control: Add an option to the radio baud rate window which does not reset the radio codec after a digital transmission. (KE2D) (Coded by K3CT)

Radio Control: Added the FT-710 radio. This radio can not accept multiple radio commands when polling or configuring. Please test and report issues. (Coded by K3CT)

Radio Control: Added FTDX101D, FTDX10 and FT-710 support for the Mute MIC option in Configurer, Other tab. (Coded by K3CT) Radio Control: Changed the FTDX10 to send mode before frequency. (Coded by K3CT)

Per Operator: Correctly display the Check window panes when changing operator. (Coded by K3CT)

Cat Macro: Allow a CatMacro in an {END} macro. (K0RC) (Coded by K3CT)

View Statics: Add a non-sticky option to include dupes in the data/charts. (N3RD) (Coded by K3CT)

Check Window: Change the default yank string to "LMT". (Coded by K3CT)

Per Operator: Bug, some per operator settings were reset to the prior operator values when Configurator was opened. (Coded by K3CT)

Per Operator: Added per operator settings: WinKey Independent, Check Window display exchange pane, Check window yank configuration, and AutoHotKey filename. (Coded by K3CT)

Macro: Change the {SENTRSTCUT} macro to modify RST only on CW. Only 9 is converted to N. If you want to send something else, hard code it. (Coded by K3CT)

Macro: Changed the {CATDELAY} maximum time to 10 seconds so it can be used to work around a bug in the firmware. (K0RC) (Coded by K3CT)

Radio Control: Reduce the number of commands sent to the radio in SO2V mode when setting the frequency in tracking mode. (Coded by K3CT)

Operator Change: If the new operator callsign settings file does not exist in SkinsAndLayouts, load the "DEFAULT.settings" file. If the defaults file does not exist, load the station callsign settings file. This allows the station callsign to have unique settings but new operators to start with selected settings. (K1TTT) (Coded by K3CT)