Program Files - Latest Update (54)

Fix RTE & focus problem with inputboxes. (PA1T) (Coded by N1MM)

In grayline map, make nighttime darker when using old-style map. (K3UU) (Coded by N2IC)

Make Reverse I/Q flag sticky (LU3BTY) (Coded by N1MM) Add a warning if the user adds CATASC KY function key definitions for sending CW. (WV4P) (Coded by N2IC) WSJT/JTDX: Correct issue where JTDX kept closing after it was loaded. (Coded by N2AMG) Fixed translation error whenever dictionary was used as parameter to InputBox. Created InputBoxW which handles Unicode. (Coded by AB2ZY) JTDX: When recieving a log from JTDX was not properly sending ACK back to JTDX upon reciept of the log. (Coded by N2AMG) CWReader: Corrects issue where upon loading the CWReader the radio needed to be reset. (Many) (Coded by N2AMG) Enabled skins functionality on LanguagePack form (Coded by AB2ZY)   Read More

Rotor: Fix Help link. (Coded by N1MM) Digital RX Windows: Adds 2Tone to the list of Engines to select. Makes it easier for users to use it. (Coded by N2AMG) QTCWindow: When in Send mode the window had gotten smaller cutting the bottom buttons off. Now corrected. (VE2FK) (Coded by N2AMG) WSJT:Routine to look to see if WSJT has loaded was not finding the correct window handle all the time. This has been corrected. (Coded by N2AMG)   Read More

Download Latest Update: New methods for downloading and incrementing file count on the website WordPress filestore (coded by K8UT) Rewrites WSJTRadio code that checks for WSJT/JTDX is open or not. Was causing closings for no reason.(Coded by N2AMG) Corrects issue that was not saving What program (WSJT or JTDX) was being used by per Entry Window.(Coded by N2AMG) Adds menu item to Digital Interface setup menu "With RtClicked enabled Don't drop On-Deck call" This will stop the call from dropping from the on-deck window when callsign box is empty, The Mycallbouuton is highlighted, And ESM is turned on. (Coded by N2AMG)   Read More

WSJTRadio: when opening connection to WSJT/JTDX looks to see if WSJT/JTDX is already loaded if it is it will try to close it down before loading it via N1MM (Coded by N2AMG) WSJTRadio: When closing WSJT/JTDX it was not properly setting the Digital Mode to 0 so trying to operate CW after closing was not working until a reboot. (Coded by N2AMG) WSJTRadio: When exiting it was not properly exiting  the close routine in some instances so it would try to reload WSJT. Now fixed. (Coded by N2AMG) Digital Interface's re-enables the focus timer to swap focus back to entry window after 5 seconds if the Digital window has focus. (Coded by N2AMG) SAC contest: "Not a SAC Station" message for OH0/OJ0 stations - fixed (UA6AA, N7ZZ) (Coded by NA3M)   Read More

Spectrum: return focus to EW when clicking on non-client area (title bar) (Coded by N1MM) UKEIDX contest: Default Sent Excahnge was changed from "001 AB" to "001 ??" (GW0ETF) (Coded by NA3M) RUS-WW-DIG contest: Incorrect default sent exchange (CQ zone) was used instead of serial number (#) (K5CKS) (Coded by NA3M) UDC: 0 points can be used in PointsPerContact to limit scoring to the required bands. Example: PointsPerContact = 80m, 1, 40m, 1, 20m, 1, 160m, 0, 15m, 0, 10m, 0 (G4OGB) (Coded by NA3M) SAC contest: for Callsigns with 2 or more digits the first one should be used as in CallArea (ex. OH150AA - OH1) (R4KO) (Coded by NA3M)   Read More

Entry Window: Changed the Config menu first line wording. (K3WYC) (Coded by K3CT) AZ QSO Party: Changed the bonus station callsign. (Coded by K3CT) Callstack Window: Window state was not saved to .ini file. It is now (Coded by N2AMG) WSJT Interface: Complete re-write of radio TCP connection. Is now a multi-connectiion client. (Coded by N2AMG) This will now allow for users to switch configurations and the need to restart the radio connection is no longer needed. This should also result in the radio dropouts as were previously happening. Reworks the connection status on the WSJT Radio window. Adjusts some code needed for use with upcoming release of JTDX with FT4 Mode. (Coded by N2AMG) Entry Window: In RTTY when call is in On Deck window pressing Enter in ESM with the Big Gun switch on and MyCall Key highlighted will drop the call into the Entry Window and call the station. (K6LL)(Coded by N2AMG) Documentation PDF: Changed program download pointer >Tools "Download latest N1MM Logger PDF" for new File Manager on the website (Coded by K8UT)   Read More

Make all methods for changing between RUN and MULT, or RUN1 and RUN2, stations work consistently. (Coded by N2IC)    Read More

Version 1.0.7952 (Sept 17, 2019) When using Spectrum Scope with ExtIO-based SDR's, changed method detecting when transmitting. (Coded by N2IC) UDC: Bug fix for "PointsPerContact = /MA,x" or "= /MM,x". (G4OGB) (Coded by NA3M) FT8/FT4 modes: Every transmission in FT8/FT4 mode was adding line "Radio SetXmit - isRx= " in LogError.txt - fixed (Coded by NA3M) SRRCUPDIGI: Bug fix for band changes per hour not counted for Single-Op category stations. (R4KO) (Coded by NA3M)   Read More

Version 1.0.7943 (Sept 10, 2019) CW Reader Window: When Fldigi loaded it was not setting the align frequency correctly. Now fixed. (Coded by N2AMG)par WSJT Radio: Attempts to speed up TCP routines for radios with slower poll rates. (Coded by N2AMG) In SO1R JTDX was not logging correctly. The TCP connection was not started. (RF9C) (Coded by N2AMG)   Read More

Version 1.0.7937 (Sept 3, 2019) Config, Mode Control: Rename "PSK" to "DIGI". (Coded by K3CT) PA QSO Party: Rules update, changed bonus station callsign, removed NV county abbreviation logging, reworked county line logging. (Coded by K3CT) All QSO Parties: Reworked county line logging code for fixed, Rover, and county line. (Coded by K3CT) 7QP/NEWE/DE/IN QSO Party: Added Mults, Additional Counties window. (Coded by K3CT) 7QP/NEWE/DE/IN QSO Party: Prevent exchange entry when the wrong contest is selected. (Coded by K3CT) 7QP/NEWE/DE/IN QSO Party: Added IN QSO short cut county line logging. Reworked county line logging code. (N7EPD) (Coded by K3CT) 7QP/NEWE/DE/IN QSO Party: Removed all the state abbreviation mappings, example KEN = KY. (Coded by K3CT) DE QSO Party: Changed to Cabrillo 3.0 (Coded by K3CT) DE QSO Party: Fixed a bug that redisplayed the logging error message. (Coded by K3CT) DE QSO Party: When populating the exchange from the log, use the MiscText database field. (N7EPD ) (Coded by K3CT) AL QSO Party: Rules change to phone QSO points. (N4NM) (Coded by K3CT) NV QSO Party: Rules changes, removed PA QSO county logging, no longer a serial # exchange, change to ARRL Section mults. (W6US) (Coded by K3CT) QSO Party Log Selection: Prevent invalid QSO Party names from appearing in the State dropdown list. (Coded by K3CT) NEWE QSO Party: Removed the out of date three character county abbreviations. N1MM Logger will only support one county abbreviation list. The sponsor wants to retain the current county then state abbreviation format. (K1KI) (Coded by K3CT) Thanks to N7EPD for testing the 7QP, NEWE, IN, DE, and IN7QPNE QSO party changes. In SO2R, a UDP Broadcast Radio message is now sent whenever the active radio is changed, before the SO2R Radio Swap Transmit Lead Time. (VE3NTT) (Coded by N2IC) WSJT Decode List: Corrects RT Error when clicking onvarious lines in the window. (Coded by N2AMG) Stops writting WSJT call coloing info to LogError.txt (Coded by N2AMG) When logging a contact via import (WSJT) if QSO_DATE_OFF is found in the ADIF, N1MM will use that as the qso date in the log. If not found will use QSO_DATE. (Coded by N2AMG) When logging a qso from WSJT the Run1/Run2 status was not getting logged. This has been fixed. (Coded by N2AMG)   Read More

Version 1.0.7925 (Aug 28, 2019)Control Labels: Added context menus to types available for translations. (Coded by AB2ZY)Entry Window: Fixed embedded CRLF’s in dictionary. Exposed all translation functions to users. (Coded by AB2ZY)Language Pack: New function for users to download and install language packs. (Coded by AB2ZY)Localization: Added support on load for context menus. (Coded by AB2ZY)SpectrumWindow: Added out of band coloring. (Coded by KU7T)SpectrumWindow: Handling rare NullReferenceException when radio’s frequency cannot be drawn. (KC3ESH, others) (Coded by KU7T)Grayline: Improved performance and changed map to one with political divisions (Coded by N1MM)Spectrum: fix for runtime error in DrawRadioFrequencyOnWaterfall (KC3ESH) (Coded by N1MM)GridField Map: Refresh display when the band changes. (VE3KI) (Coded by K3CT)Digital Mode: Changed Mode selectors to display “DIGI” instead of “PSK”. Eventually DIGI mode will be used for all soundcard digital modes. (Coded by K3CT) FT8/FT4: Additional changes for Bandmap & Available window supporting FT modes. (Coded by K3CT)   Read More

Version 1.0.7907 (Aug 20, 2019) Available Window: Add FT4 & FT8 to the displayable modes. (N2AMG) (Coded by K3CT) DBSupport: Added index to DXLog table to increase avaialable QTC query performance. (Coded by AB2ZY) WSJT Radio: Fix RTE error that was corrected in the Expermental version. (Coded by N2AMG) QTC Window: Adjust size of window as bottom rows of text could not always bee seen. (Coded by N2AMG) WSJT: When opening WSJT or JTDX the correct digital mode was not loading correctly. (Coded by N2AMG)   Read More

Version 1.0.7900 (Aug 13, 2019) WSJT Decode List: Added SNR to the list display. (Coded by N2AMG) WSJT Decode List: During the WWDIGI contest shows assumed points for each station in the list. (Coded by N2AMG) WSJT Decode List and WSJT Radio window were not saving their locations correctly. This is now fixed. (Coded by N2AMG) Winkey: Fix problem seen by one XP user. (KE2D) (Coded by N2IC) WSJT Decode List: Clicking in the window anyplace will now shift Radio and keyboard focus to the parent Entry Window of the list. (Coded by N2AMG) Fix Blacklist Spots and Blacklist Spotters when using Telnet windows to edit their callsigns. (Coded by N2IC) WWDIGI: Change Cabrillo format to 3.0 (W0YK) (Coded by N1MM) Cabrillo: Changed V3.0 mode for Digital to “DIGI” (W0YK) (Coded by N1MM) QTC Window Changes (Coded by N2AMG) Allows ` key to be passed to the Entry Window. Allows F1-F12 passed to the Entry Window Note: Pressing the TU F-key will Send the TU message, Save the current QTC in SQTC or RQTC and close the QTC Window Pressing the Agn F-Key will send the AGN message associated with the current QTC line in the QTC window. In CW RQTC allows for keypress 1, 2, 3, to be configured to what the user wants to send. See Setup window. in CW SQTC allows te QTC field spacing to be configured. Default is one Space character. See Setup window. Fixes for Microwave bands and logging incorrect freq issue. Added 2.5mm band (122.5-123GHz), corrected 2mm band frequencies from 142-149GHz to 134-141GHz (FCC-Assigned). Added a warning message in LogContact2 to inform user of possible wrong frequency logged. (W3SZ, K1RZ) (Coded by NA3M)   Read More

Version 1.0.7883 (Aug 6, 2019) WSJT Decode List: When clicking on a call in the second list in SO2R nothing would happen. Corrected (Coded by N2AMG) WSJT Decode List: If the grid field is present in the Entry Window then the Grid field is auto filled in for Mult checking. (Coded by N2AMG) WSJT/JTDX: FT4 Mode was not properly being detected in the decode out UDP message. This was was causing dupe checking to not work properly. (Coded by N2AMG) Function Key Message Editor: Do not display “Do you want to save changes?” when the Cancel button is pressed (N3QE) (Coded by K8UT) WSJT/JTDX: Disables Logging via the Entry window if WSJT/JTDX is running from that entry window. (Coded by N2AMG) TS-890: Added radio control with on the fly voice message recording/playback. Special thanks to George, W7GES for debug & testing. (Coded by K3CT) FTDX101D: Added radio control. Special thanks to Dani, EA5FV and Dave, W0VX for debug & testing. (Coded by K3CT) Radio Control: Changed a common routine used to validate the VFOA/B frequencies. Should be transparent to users. (Coded by K3CT)   Read More

Version 1.0.7870 (July 30, 2019) If WSJT window was already open. Clicking on the LoadWSJT menu would open a second instance for that window. Fixed (Coded by N2AMG) Disables Bandbuttons while the WSJT window is open. Enables them on exit of WSJT. (Coded by N2AMG) Removes Contact Mode<>Contest Mode message when using LSB, USB when contest is set to DIGITAL. (Coded by N2AMG) ARRL-222 contest: udc version of this contest is disabled, added this contest in contest class. Scoring problems fixed, distance is shown in km in EW, columns overlaping in Score window fixed, all UHF/SHF bands are now supported (W3SZ, K1RZ) (Coded by NA3M)   Read More

Version 1.0.7860 (July 23, 2019) Entry Window & Contact: Fixed ADIF exports to get contest data from contact instead of Station.CurrentContest. (UD2F) (Coded by AB2ZY) Spectrum: Improve ExtIO dll reliability (Coded by N1MM) Spectrum: Enabled automatic suppression of TX signal Applies to, but not tested in IC7610 IQ data.(Coded by N1MM)   Read More

Version 1.0.7845 (July 18, 2019) Grid Square Map: Worked multipliers are no longer colored. (GD0AMD) (Coded by K3CT)

Version 1.0.7841 (July 16, 2019) Improve error handling downloading world map for Grid Field multiplier window (Coded by N1MM) WWDIGI: Improve computation of points & mults (W0YK) (Coded by N1MM) WWDIGI: Fix for change to 2019 exchange (W0YK) (Coded by N1MM) Score Summary window: Added Rescore button (Coded by N1MM) Spectrum: resize would hesitate when changing size horizontally when in bar mode or vertically when in column mode (K1TTT) (Coded by N1MM) Added 10 GHZ to list of VHF/UHF contests. (Coded by N1MM) Corrected reverse bearings for Entry Window and packet spots (VE3KI) (Coded by N1MM)   Read More

Version 1.0.7825 (July 9, 2019) World Wide Digi DX Contest: (WWDIGI) Initial coding (W0YK) (Coded by N1MM) Fixed RTE when exiting Configurer and there is a user error in digital setup. (NN3RP/YN2RP) (Coded by N2IC) Radio Control: Added FTDX101D to the code. The radio menu item is disabled. Please test the experimental version. (EA5FV) (Coded by K3CT) Fixed missing checkmark in Entry Window. IARU: Fixed HQ multiplier window display. (W1KM) (Coded by N2IC) WSJT Radio: Correct Double parse RT error generated with users that use, as a decimal seperator. (Coded by N2AMG) Added GridFieldMap for WWDIGI and any other contest that uses Grid Fields as multipliers. Added a world map as well (Coded by K3CT, N1MM)   Read More

Version 1.0.7773 (June 25, 2019) Spectrum: Improve downsampling algorithm (Coded by N1MM) Spectrum: Improvements to potential CQ frequency display and management. Works better with centered display. (Coded by N1MM) Change ADIF string to export both TIME_ON and TIME_OFF with contact time (many) (Coded by N1MM) Change ADIF Import. If TIME_OFF is found it will use that as imported time. If TIME_OFF is not found it will use TIME_ON (Coded by N2AMG) Change to the formatting used in WSJT Radio to read both decimal and thousands seperators correctly. (Coded by N2AMG)   Read More

Version 1.0.7763 (June 18, 2019) When importing ADIF files via the file import or via the UDP port it was using TIME_ON for the timestamp. Now uses TIME_OFF. (K1EP) (Coded by N2AMG) When using Winkey RTTY if CW/Other checkbox is not checked provides a warning instead of an Error message. (Coded by N2AMG) Fixed link from the Tools menu to the N1MMLogger.pdf documentation download file (K0XP) (Coded by K8UT) Fixed foreground colors in rotor program (W2NRA) (Coded by N1MM) Fixed RTE in Multi computer support (KE8DAC) (Coded by N1MM) Spectrum: improved visibility of green frequency lines in bar mode (KU7T) (Coded by N1MM) Spectrum: improved visibility of spots on current frequency in column mode (Coded by N1MM) Spectrum: fixed RTE in waterfall display code (many) (Coded by N1MM)   Read More

Version 1.0.7753 (June 11, 2019) ADIF: Now supports import and Export of Mode/SubMode as required by latest ADIF Spec. (Coded by N2AMG) Rotor: show windows using main program’s colors when main program is running (K3CT (Coded by N1MM) Configurer: Fixed size of window (K3CT) (Coded by N1MM) Lengthened wait time for Airspy Server to initialize (W7GES) (Coded by N1MM) Allow pasting lower case grid text into grid textbox and convert to upper case (N1API) (Coded by N1MM) Correct jumping of CQ frequencies (N6XI) (Coded by N1MM) Function Key Editor – MsgForm.vb – fixed menu problem when importing files (M0DHP) (Coded by K8UT) IC-7610 Spectrum: 2nd 7610 was not initializing properly (EA8RM) (Coded by N1MM) IC-821 & IC-9100: Correct the FM mode command. (N8DNX) (Coded by K3CT)   Read More